Electronics 577-24 User Manual download pdf

ELECTRONICS INCORPORATED

SHOT PEENING TECHNOLOGY

MODEL 577-24 MagnaValve

www.electronics-inc.com

577-24data.pub 5/18/09

999289

The Model 577-24 MagnaValve is a normally closed magnetic valve suitable for

regulation of steel shot and includes a built-in sensor for accurate measurement of flow

rate. Used with the Model FC-24 Shot Flow Controller, the MagnaValve will provide

accurate and repeatable flow rates over a 1 - 10 pounds-per-minute flow range. The

577-24 MagnaValve can be re-calibrated for various shot types and sizes for higher

accuracy.

The valve construction includes a permanent magnet for normally closed operation

and an electromagnet for controlling shot flow rates. By regulating the voltage to the

electromagnet, any desired flow rate may be achieved. When power is off, the valve

will hold shot due to the permanent magnet.

The Model 577-24 MagnaValve incorporates a preamplifier circuit to allow for high

noise immunity and a 0-10 Vdc output. The valve is factory calibrated and results are

included upon request. Note: consult factory for pre-calibration using media other than

cast steel shot.

 High Accuracy - ±5% of FS

 Built-in flow sensor

 1 - 10 lbs/min range

 Normally closed

 Requires FC - 24 Flow Controller

 Air type shot peening machines

 Variable flow rates

 No moving parts

 Steel shot or Steel grit

 With 6’ Cable

1 2

ELECTRONICS INCORPORATED SHOT PEENING TECHNOLOGY MODEL 577-24 MagnaValve www.electronics-inc.com 577-24data.pub 5/18/09 999289 The Model 577-24 Magna

Page 2

56790 Magnetic Drive, Mishawaka, IN, USA 46545 (574) 256-5001 MODEL 577-24 MagnaValve 577-24data.pub 5/18/09 SPECIFICATIONS Sensor Display LED’s: Val

No comments

Electronics 577-24 User Manual